Cara Mengatasi Masalah Mic di Phoenix OS | Error & Noise
Cara mengatasi mic Phoenix OS error dan noise – Halo sobat, pada artikel ini saya akan membagikan cara untuk mengatasi mic error pada Phoenix OS. Mic pada Phoenix OS bisanya mengeluarkan suara noise yang menggangu atau bahkan mic tidak berfungsi sama sekali.
Bagi Anda yang bermain game khususnya PUBG Mobile menggunakan headphone atau headset tentu memerlukan mic untuk berkomunikasi dengan tim, namun karena suara mic noise atau berisik di Phoenix OS tentu akan menganggu teman satu tim.
Bahan
Cara Mengatasi Mic Error di Phoenix OS
Berikut dua cara mengatasi mic error di Phoenix OS semua versi khususnya Phoenix OS 3.5.1, 3.6.1, ROC dan berbagai versi lainnya.
Langkah 1. Silahkan download FX File Explorer dan instal seperti biasa.
Langkah 2. Masuk ke System (Root) → System → Etc.
Langkah 3. Buka file Init.sh dengan FX Text Editor.
Langkah 4. Cari atau scroll kebawah pada alsa_amixer, kemudian ubah value berikut.
alsa_amixer -c $c set ‘Mic Boost’ 3 → Ganti angka 3 menjadi 0, 0.1, 0.2 dan seterusnya.
alsa_amixer -c $c set ‘Internal Mic Boost’ 3 → Ganti angka 3 menjadi 0, 0.1, 0.2 dan seterusnya.
Langkah 5: Terakhir silahkan restart Phoenix OS Anda.
Cara Kedua
Silahkan copy semua kode init.sh berikut dan replace pada file init.sh Anda dan restart Phoenix OS.
#
# Copyright (C) 2013-2015 The Android-x86 Open Source Project
#
# License: GNU Public License v2 or later
#
function set_property()
{
setprop "$1" "$2"
[ -n "$DEBUG" ] && echo "$1"="$2" >> /dev/x86.prop
}
function set_prop_if_empty()
{
[ -z "$(getprop $1)" ] && set_property "$1" "$2"
}
function init_misc()
{
# device information
# CHAOZHUO BEGIN
######################## manufacturer #############################
#cz_manufacturer=
#if [ -f /data/system/chaozhuo/cz_manufacturer ]; then
# cz_manufacturer=`cat /data/system/chaozhuo/cz_manufacturer`
# if [ -n "$cz_manufacturer" ]; then
# setprop ro.product.manufacturer "$cz_manufacturer"
# else
# setprop ro.product.manufacturer "$(cat $DMIPATH/sys_vendor)"
# fi
#else
# setprop ro.product.manufacturer "$(cat $DMIPATH/sys_vendor)"
#fi
######################## model #############################
#cz_model=
#if [ -f /data/system/chaozhuo/cz_model ]; then
# cz_model=`cat /data/system/chaozhuo/cz_model`
# if [ -n "cz_model" ]; then
# setprop ro.product.model "$cz_model"
# else
# setprop ro.product.model "$PRODUCT"
# fi
#else
# setprop ro.product.model "$PRODUCT"
#fi
######################## brand #############################
#cz_brand=
#if [ -f /data/system/chaozhuo/cz_brand ]; then
# cz_brand=`cat /data/system/chaozhuo/cz_brand`
# if [ -n "cz_brand" ]; then
# setprop ro.product.brand "cz_brand"
# else
# # setprop ro.product.brand "$(cat $DMIPATH/sys_vendor)"
# fi
#else
# setprop ro.product.manufacturer "$(cat $DMIPATH/sys_vendor)"
#fi
#setprop ro.product.manufacturer "$(cat $DMIPATH/sys_vendor)"
#setprop ro.product.model "$PRODUCT"
#if [ ! -s /data/system/chaozhuo/cz_model ]; then
# setprop ro.product.model "$PRODUCT"
#else
# cz_model=`cat /data/system/chaozhuo/cz_model`
# if [ ! -n "$cz_model" ]; then
# setprop ro.product.model "$PRODUCT"
# fi
#fi
#if [ ! -s /data/system/chaozhuo/cz_manufacturer ]; then
# setprop ro.product.manufacturer "$(cat $DMIPATH/sys_vendor)"
#else
# cz_manufacturer=`cat /data/system/chaozhuo/cz_manufacturer`
# if [ ! -n "$cz_manufacturer" ]; then
# setprop ro.product.manufacturer "$(cat $DMIPATH/sys_vendor)"
# fi
#fi
# CHAOZHUO END
#setprop ro.product.manufacturer "$(cat $DMIPATH/sys_vendor)"
#setprop ro.product.model "$PRODUCT"
# a hack for USB modem
lsusb | grep 1a8d:1000 && eject
# in case no cpu governor driver autoloads
[ -d /sys/devices/system/cpu/cpu0/cpufreq ] || modprobe acpi-cpufreq
}
function init_hal_audio()
{
case "$PRODUCT" in
VirtualBox*|Bochs*)
[ -d /proc/asound/card0 ] || modprobe snd-sb16 isapnp=0 irq=5
;;
*)
;;
esac
if grep -qi "IntelHDMI" /proc/asound/card0/id; then
[ -d /proc/asound/card1 ] || set_property ro.hardware.audio.primary hdmi
fi
}
function init_hal_wifi()
{
# BCM WiFi driver conflict start.
# Broadcom BCM4311 (PCI IDs 14e4:4311, 14e4:4312)
# Broadcom BCM4312 (PCI ID 14e4:4315)
# Broadcom BCM4313 (PCI ID 14e4:4727)
# Broadcom BCM4321 (PCI IDs 14e4:4328, 14e4:4329, 14e4:432a)
# Broadcom BCM4322 (PCI IDs 14e4:432b, 14e4:432c, 14e4:432d)
# Broadcom BCM43224 (PCI IDs 14e4:0576, 14e4:4353)
# Broadcom BCM43225 (PCI ID 14e4:4357)
# Broadcom BCM43227 (PCI ID 14e4:4358)
# Broadcom BCM43228 (PCI ID 14e4:4359)
# Broadcom BCM43142 (PCI ID 14e4:4365)
# Broadcom BCM4331 (PCI ID 14e4:4331)
# Broadcom BCM4352 (PCI ID 14e4:43b1)
# Broadcom BCM4360 (PCI IDs 14e4:43a0, 14e4:4360)
BCMAID=`lspci | grep "14e4" | awk '{print $4}'`
case "${BCMAID##*:}" in
4311 | 4312 |
4315 |
4727 |
4328 | 4329 | 432a |
432b | 432c | 432d |
0576 | 4353 |
4357 | 4358 | 4359 |
4365 |
4331 |
43b1 |
43a0 | 4360 )
rmmod b43
rmmod b44
rmmod b43legacy
rmmod ssb
rmmod bcma
rmmod brcm80211
rmmod wl
modprobe wl
;;
*)
;;
esac
# BCM WiFi driver conflict end.
# BCM SDIO WiFi driver config file start.
BCMSDIO=`dmesg | grep brcmfmac | grep txt`
if [ "$BCMSDIO" != "" ]; then
BCMNAME=`echo $BCMSDIO | awk '{print $9}'`
mount -t efivarfs none /sys/firmware/efi/efivars
cp /sys/firmware/efi/efivars/nvram-74b00bd9-805a-4d61-b51f-43268123d113 /lib/firmware/$BCMNAME
set_property phoenixos.brcmfmac 1
fi
# BCM SDIO WiFi driver config file end.
}
function init_hal_bluetooth()
{
for r in /sys/class/rfkill/*; do
type=$(cat $r/type)
[ "$type" = "wlan" -o "$type" = "bluetooth" ] && echo 1 > $r/state
done
case "$PRODUCT" in
T10*TA|HP*Omni*)
BTUART_PORT=/dev/ttyS1
set_property hal.bluetooth.uart.proto bcm
;;
MacBookPro8*)
rmmod b43
modprobe b43 btcoex=0
modprobe btusb
;;
*)
for bt in $(busybox lsusb -v | awk ' /Class:.E0/ { print $9 } '); do
chown 1002.1002 $bt && chmod 660 $bt
done
;;
esac
if [ -n "$BTUART_PORT" ]; then
set_property hal.bluetooth.uart $BTUART_PORT
chown bluetooth.bluetooth $BTUART_PORT
start btattach
fi
# rtl8723bs bluetooth
if dmesg -t | grep -qE '8723bs.*BT'; then
TTYSTRING=`dmesg -t | grep -E 'tty.*MMIO' | awk '{print $2}' | head -1`
if [ -n "$TTYSTRING" ]; then
echo "RTL8723BS BT uses $TTYSTRING for Bluetooth."
ln -sf $TTYSTRING /dev/rtk_h5
start rtk_hciattach
fi
fi
}
function init_hal_camera()
{
return
}
function init_hal_gps()
{
# TODO
return
}
function set_drm_mode()
{
case "$PRODUCT" in
ET1602*)
drm_mode=1366x768
;;
VMware*)
[ -n "$video" ] && drm_mode=$video
;;
*)
;;
esac
[ -n "$drm_mode" ] && set_property debug.drm.mode.force $drm_mode
}
function init_uvesafb()
{
case "$PRODUCT" in
ET2002*)
UVESA_MODE=${UVESA_MODE:-1600x900}
;;
*)
;;
esac
modprobe uvesafb mode_option=${UVESA_MODE:-1024x768}-32 ${UVESA_OPTION:-mtrr=3 scroll=redraw}
}
function init_hal_gralloc()
{
case "$(cat /proc/fb | head -1)" in
*virtiodrmfb)
if [ "$HWACCEL" != "0" ]; then
set_property ro.hardware.hwcomposer drm
set_property ro.hardware.gralloc gbm
fi
set_prop_if_empty sleep.state none
;;
0*inteldrmfb|0*radeondrmfb|0*nouveaufb|0*svgadrmfb|0*amdgpudrmfb)
if [ "$HWACCEL" != "0" ]; then
set_property ro.hardware.gralloc drm
set_drm_mode
fi
;;
"")
init_uvesafb
;&
0*)
;;
esac
[ -n "$DEBUG" ] && set_property debug.egl.trace error
}
function init_hal_hwcomposer()
{
# TODO
return
}
function init_hal_lights()
{
chown 1000.1000 /sys/class/backlight/*/brightness
}
function init_hal_power()
{
for p in /sys/class/rtc/*; do
echo disabled > $p/device/power/wakeup
done
# TODO
case "$PRODUCT" in
HP*Omni*|OEMB|Surface*3|T10*TA)
set_prop_if_empty sleep.state none
;;
*)
;;
esac
}
function init_hal_sensors()
{
# if we have sensor module for our hardware, use it
ro_hardware=$(getprop ro.hardware)
[ -f /system/lib/hw/sensors.${ro_hardware}.so ] && return 0
local hal_sensors=kbd
local has_sensors=true
case "$(cat $DMIPATH/uevent)" in
*Lucid-MWE*)
set_property ro.ignore_atkbd 1
hal_sensors=hdaps
;;
*ICONIA*W5*)
hal_sensors=w500
;;
*S10-3t*)
hal_sensors=s103t
;;
*Inagua*)
#setkeycodes 0x62 29
#setkeycodes 0x74 56
set_property ro.ignore_atkbd 1
set_property hal.sensors.kbd.type 2
;;
*TEGA*|*2010:svnIntel:*)
set_property ro.ignore_atkbd 1
set_property hal.sensors.kbd.type 1
io_switch 0x0 0x1
setkeycodes 0x6d 125
;;
*DLI*)
set_property ro.ignore_atkbd 1
set_property hal.sensors.kbd.type 1
setkeycodes 0x64 1
setkeycodes 0x65 172
setkeycodes 0x66 120
setkeycodes 0x67 116
setkeycodes 0x68 114
setkeycodes 0x69 115
setkeycodes 0x6c 114
setkeycodes 0x6d 115
;;
*tx2*)
setkeycodes 0xb1 138
setkeycodes 0x8a 152
set_property hal.sensors.kbd.type 6
set_property poweroff.doubleclick 0
set_property qemu.hw.mainkeys 1
;;
*MS-N0E1*)
set_property ro.ignore_atkbd 1
set_property poweroff.doubleclick 0
setkeycodes 0xa5 125
setkeycodes 0xa7 1
setkeycodes 0xe3 142
;;
*Aspire1*25*)
modprobe lis3lv02d_i2c
echo -n "enabled" > /sys/class/thermal/thermal_zone0/mode
;;
*ThinkPad*Tablet*)
modprobe hdaps
hal_sensors=hdaps
;;
*i7Stylus*|*S10T*)
set_property hal.sensors.iio.accel.matrix 1,0,0,0,-1,0,0,0,-1
[ -z "$(getprop sleep.state)" ] && set_property sleep.state none
;;
*ST70416-6*)
set_property hal.sensors.iio.accel.matrix 0,-1,0,-1,0,0,0,0,-1
;;
*ONDATablet*)
set_property hal.sensors.iio.accel.matrix 0,1,0,1,0,0,0,0,-1
;;
*ASUSFlipTP412*)
set_property hal.sensors.iio.accel.matrix 0,1,0,-1,0,0,-1,0,0
;;
*)
has_sensors=false
;;
esac
# has iio sensor-hub?
if [ -n "`ls /sys/bus/iio/devices/iio:device* 2> /dev/null`" ]; then
busybox chown -R 1000.1000 /sys/bus/iio/devices/iio:device*/
lsmod | grep -q hid_sensor_accel_3d && hal_sensors=hsb || hal_sensors=iio
elif lsmod | grep -q lis3lv02d_i2c; then
hal_sensors=hdaps
fi
# TODO close Surface Pro 4 sensor until bugfix
case "$(cat $DMIPATH/uevent)" in
*SurfacePro4*)
hal_sensors=kbd
;;
*)
;;
esac
set_property ro.hardware.sensors $hal_sensors
[ "$hal_sensors" != "kbd" ] && has_sensors=true
set_property config.override_forced_orient $has_sensors
}
function create_pointercal()
{
if [ ! -e /data/misc/tscal/pointercal ]; then
mkdir -p /data/misc/tscal
touch /data/misc/tscal/pointercal
chown 1000.1000 /data/misc/tscal /data/misc/tscal/*
chmod 775 /data/misc/tscal
chmod 664 /data/misc/tscal/pointercal
fi
}
function init_tscal()
{
case "$PRODUCT" in
ST70416-6*)
modprobe gslx680_ts_acpi
;&
T91|T101|ET2002|74499FU|945GSE-ITE8712|CF-19[CDYFGKLP]*)
create_pointercal
return
;;
*)
;;
esac
for usbts in $(lsusb | awk '{ print $6 }'); do
case "$usbts" in
0596:0001|0eef:0001)
create_pointercal
return
;;
*)
;;
esac
done
}
function init_ril()
{
case "$(cat $DMIPATH/uevent)" in
*TEGA*|*2010:svnIntel:*|*Lucid-MWE*)
set_property rild.libpath /system/lib/libhuaweigeneric-ril.so
set_property rild.libargs "-d /dev/ttyUSB2 -v /dev/ttyUSB1"
set_property ro.radio.noril no
;;
*)
set_property ro.radio.noril yes
;;
esac
}
function init_cpu_governor()
{
governor=$(getprop cpu.governor)
[ $governor ] && {
for cpu in $(ls -d /sys/devices/system/cpu/cpu?); do
echo $governor > $cpu/cpufreq/scaling_governor || return 1
done
}
}
function phoenixos_compat()
{
PHOENIX_LOG=/data/system/phoenixos.log
PHOENIX_LOG1=/data/system/phoenixos1.log
PHOENIX_TEMP=/data/system/tmp
PHOENIX_DISK=`cat /data/system/phoenixlog.addr`
PHOENIX_COMPAT_BIN=/system/xbin/phoenix_compat
if [ -f /data/system/phoenixlog.dir ]; then
PHOENIX_DIR=`cat /data/system/phoenixlog.dir`
else
PHOENIX_DIR=PhoenixOS
fi
if [ $1 = "cmdline" ]; then
sed -i '5s/^.*$/boot: cmdline/' $PHOENIX_LOG
else
if [ $1 = "android" ]; then
sed -i '5s/^.*$/boot: android/' $PHOENIX_LOG
else
sed -i '5s/^.*$/boot: phoenixos/' $PHOENIX_LOG
fi
$PHOENIX_COMPAT_BIN $1
cp -f $PHOENIX_LOG1 $PHOENIX_LOG
fi
mount $PHOENIX_DISK $PHOENIX_TEMP
cp -f $PHOENIX_LOG $PHOENIX_TEMP/$PHOENIX_DIR
umount $PHOENIX_TEMP
}
function do_init()
{
phoenixos_compat cmdline
init_misc
init_hal_audio
init_hal_wifi
init_hal_bluetooth
init_hal_camera
init_hal_gps
init_hal_gralloc
init_hal_hwcomposer
init_hal_lights
init_hal_power
init_hal_sensors
init_tscal
init_ril
post_init
}
function do_netconsole()
{
modprobe netconsole netconsole="@/,@$(getprop dhcp.eth0.gateway)/"
}
function do_bootanim()
{
phoenixos_compat android
[ -n "$(getprop phoenixos.brcmfmac)" ] && rmmod brcmfmac && modprobe brcmfmac
}
function do_bootcomplete()
{
phoenixos_compat phoenixos
init_cpu_governor
[ -z "$(getprop persist.sys.root_access)" ] && setprop persist.sys.root_access 3
lsmod | grep -Ehq "brcmfmac|rtl8723be" && setprop wlan.no-unload-driver 1
case "$PRODUCT" in
1866???|1867???|1869???) # ThinkPad X41 Tablet
start tablet-mode
start wacom-input
setkeycodes 0x6d 115
setkeycodes 0x6e 114
setkeycodes 0x69 28
setkeycodes 0x6b 158
setkeycodes 0x68 172
setkeycodes 0x6c 127
setkeycodes 0x67 217
;;
6363???|6364???|6366???) # ThinkPad X60 Tablet
;&
7762???|7763???|7767???) # ThinkPad X61 Tablet
start tablet-mode
start wacom-input
setkeycodes 0x6d 115
setkeycodes 0x6e 114
setkeycodes 0x69 28
setkeycodes 0x6b 158
setkeycodes 0x68 172
setkeycodes 0x6c 127
setkeycodes 0x67 217
;;
7448???|7449???|7450???|7453???) # ThinkPad X200 Tablet
start tablet-mode
start wacom-input
setkeycodes 0xe012 158
setkeycodes 0x66 172
setkeycodes 0x6b 127
;;
*)
;;
esac
# [ -d /proc/asound/card0 ] || modprobe snd-dummy
for c in $(grep '[.*]' /proc/asound/cards | awk '{print $1}'); do
f=/system/etc/alsa/$(cat /proc/asound/card$c/id).state
if [ -e $f ]; then
alsa_ctl -f $f restore $c
alsa_amixer -c $c set Speaker 50%
else
alsa_ctl init $c
alsa_amixer -c $c set Master on
alsa_amixer -c $c set Master 100%
alsa_amixer -c $c set Headphone on
alsa_amixer -c $c set Headphone 100%
alsa_amixer -c $c set Speaker 100%
alsa_amixer -c $c set Capture 80%
alsa_amixer -c $c set Capture cap
alsa_amixer -c $c set PCM 100 unmute
alsa_amixer -c $c set SPO unmute
alsa_amixer -c $c set IEC958 on
alsa_amixer -c $c set 'Mic Boost' 0
alsa_amixer -c $c set 'Internal Mic Boost' 0
alsa_amixer -c $c set Line on
alsa_amixer -c $c set Line 100%
alsa_amixer -c $c set 'Line Boost' 1
alsa_amixer -c $c set 'Front Mic' on
alsa_amixer -c $c set 'Front Mic' 100%
alsa_amixer -c $c set 'Front Mic Boost' 0
alsa_amixer -c $c set 'Rear Mic' on
alsa_amixer -c $c set 'Rear Mic' 100%
alsa_amixer -c $c set 'Rear Mic Boost' 1
alsa_amixer -c $c set 'Input Source',0 'Rear Mic'
alsa_amixer -c $c set 'Inverted Internal Mic' on
alsa_amixer -c $c set 'Inverted Internal Mic' 100%
alsa_amixer -c $c set 'Inverted Internal Mic Boost' 0
alsa_amixer -c $c cset name='Mic Capture Switch' on
alsa_amixer -c $c cset name='Internal Mic Capture Switch' on
alsa_amixer -c $c cset name='Inverted Internal Mic Capture Switch' on
alsa_amixer -c $c cset name='Internal Mic Switch' on
alsa_amixer -c $c cset name='Headset Mic Switch' off
alsa_amixer -c $c cset name='ADC Capture Switch' on
alsa_amixer -c $c cset name='Stereo ADC MIXL ADC2 Switch' on
alsa_amixer -c $c cset name='Stereo ADC MIXR ADC2 Switch' on
alsa_amixer -c sset Mic on
alsa_amixer -c sset Mic 100%
alsa_amixer -c sset 'Mic Boost' 1
alsa_amixer -c sset 'Internal Mic' on
alsa_amixer -c sset 'Internal Mic' 100%
alsa_amixer -c sset 'Internal Mic Boost' 1
alsa_amixer -c sset Capture 80%
alsa_amixer -c sset Capture cap
alsa_amixer -c sset 'Front Mic' on
alsa_amixer -c sset 'Front Mic' 100%
alsa_amixer -c sset 'Front Mic Boost' 1
alsa_amixer -c sset 'Rear Mic' on
alsa_amixer -c sset 'Rear Mic' 100%
alsa_amixer -c sset 'Rear Mic Boost' 1
alsa_amixer -c sset Line on
alsa_amixer -c sset Line 100%
alsa_amixer -c sset 'Line Boost' 1
alsa_amixer -c sset 'Input Source',0 'Rear Mic'
alsa_amixer -c sset 'Inverted Internal Mic' on
alsa_amixer -c sset 'Inverted Internal Mic' 100%
alsa_amixer -c sset 'Inverted Internal Mic Boost' 1
alsa_amixer -c cset name='Mic Capture Switch' on
alsa_amixer -c cset name='Internal Mic Capture Switch' on
alsa_amixer -c cset name='Inverted Internal Mic Capture Switch' on
alsa_amixer -c cset name='Internal Mic Switch' off
alsa_amixer -c cset name='Headset Mic Switch' off
alsa_amixer -c cset name='ADC Capture Switch' on
alsa_amixer -c cset name='Stereo ADC MIXL ADC2 Switch' on
alsa_amixer -c cset name='Stereo ADC MIXR ADC2 Switch' on
alsa_amixer -c0 $c set Mic on
alsa_amixer -c0 $c set Mic 100%
alsa_amixer -c0 $c set 'Mic Boost' 0
alsa_amixer -c0 $c set Capture 80%
alsa_amixer -c0 $c set Capture cap
alsa_amixer -c0 $c set 'Front Mic' on
alsa_amixer -c0 $c set 'Front Mic' 100%
alsa_amixer -c0 $c set 'Front Mic Boost' 0
alsa_amixer -c0 $c set 'Rear Mic' on
alsa_amixer -c0 $c set 'Rear Mic' 100%
alsa_amixer -c0 $c set 'Rear Mic Boost' 0
alsa_amixer -c0 $c set Line on
alsa_amixer -c0 $c set Line 100%
alsa_amixer -c0 $c set 'Line Boost' 0
alsa_amixer -c0 $c set 'Input Source',0 'Rear Mic'
alsa_amixer -c0 $c set 'Internal Mic Boost' 0
alsa_amixer -c0 $c set 'Inverted Internal Mic' on
alsa_amixer -c0 $c set 'Inverted Internal Mic' 100%
alsa_amixer -c0 $c cset name='Mic Capture Switch' on
alsa_amixer -c0 $c cset name='Internal Mic Capture Switch' on
alsa_amixer -c0 $c cset name='Inverted Internal Mic Capture Switch' on
alsa_amixer -c0 sset Mic on
alsa_amixer -c0 sset Mic 100%
alsa_amixer -c0 sset 'Mic Boost' 1
alsa_amixer -c0 sset 'Internal Mic' on
alsa_amixer -c0 sset 'Internal Mic' 100%
alsa_amixer -c0 sset 'Internal Mic Boost' 1
alsa_amixer -c0 sset 'Inverted Internal Mic' on
alsa_amixer -c0 sset 'Inverted Internal Mic' 100%
alsa_amixer -c0 sset 'Inverted Internal Mic Boost' 1
alsa_amixer -c0 cset name='Mic Capture Switch' on
alsa_amixer -c0 cset name='Internal Mic Capture Switch' on
alsa_amixer -c0 cset name='Inverted Internal Mic Capture Switch' on
alsa_amixer -c1 $c set Mic on
alsa_amixer -c1 $c set Mic 100%
alsa_amixer -c1 $c set 'Mic Boost' 1
alsa_amixer -c1 $c set 'Internal Mic' on
alsa_amixer -c1 $c set 'Internal Mic' 100%
alsa_amixer -c1 $c set Capture 80%
alsa_amixer -c1 $c set Capture cap
alsa_amixer -c1 $c set 'Front Mic' on
alsa_amixer -c1 $c set 'Front Mic' 100%
alsa_amixer -c1 $c set 'Front Mic Boost' 0
alsa_amixer -c1 $c set 'Rear Mic' on
alsa_amixer -c1 $c set 'Rear Mic' 100%
alsa_amixer -c1 $c set 'Rear Mic Boost' 0
alsa_amixer -c1 $c set Line on
alsa_amixer -c1 $c set Line 100%
alsa_amixer -c1 $c set 'Line Boost' 0
alsa_amixer -c1 $c set 'Input Source',0 'Rear Mic'
alsa_amixer -c1 $c set 'Internal Mic Boost' 0
alsa_amixer -c1 $c set 'Inverted Internal Mic' on
alsa_amixer -c1 $c set 'Inverted Internal Mic' 100%
alsa_amixer -c1 $c set 'Inverted Internal Mic Boost' 0
alsa_amixer -c1 $c cset name='Mic Capture Switch' on
alsa_amixer -c1 $c cset name='Internal Mic Capture Switch' on
alsa_amixer -c1 $c cset name='Inverted Internal Mic Capture Switch' on
alsa_amixer -c1 $c cset name='Mic Capture Switch' on
alsa_amixer -c1 $c cset name='Internal Mic Capture Switch' on
alsa_amixer -c1 $c cset name='Inverted Internal Mic Capture Switch' on
alsa_amixer -c1 $c cset name='Internal Mic Switch' off
alsa_amixer -c1 $c cset name='Headset Mic Switch' off
alsa_amixer -c1 $c cset name='ADC Capture Switch' on
alsa_amixer -c1 $c cset name='Stereo ADC MIXL ADC2 Switch' on
alsa_amixer -c1 $c cset name='Stereo ADC MIXR ADC2 Switch' on
alsa_amixer -c1 set Mic on
alsa_amixer -c1 set Mic 100%
alsa_amixer -c1 set 'Mic Boost' 1
alsa_amixer -c1 set 'Internal Mic' on
alsa_amixer -c1 set 'Internal Mic' 100%
alsa_amixer -c1 set 'Internal Mic Boost' 1
alsa_amixer -c1 set 'Inverted Internal Mic' on
alsa_amixer -c1 set 'Inverted Internal Mic' 100%
alsa_amixer -c1 set 'Inverted Internal Mic Boost' 1
alsa_amixer -c1 sset Mic on
alsa_amixer -c1 sset Mic 100%
alsa_amixer -c1 sset 'Mic Boost' 1
alsa_amixer -c1 sset 'Internal Mic' on
alsa_amixer -c1 sset 'Internal Mic' 100%
alsa_amixer -c1 sset 'Internal Mic Boost' 1
alsa_amixer -c1 sset Capture 80%
alsa_amixer -c1 sset Capture cap
alsa_amixer -c1 sset 'Front Mic' on
alsa_amixer -c1 sset 'Front Mic' 100%
alsa_amixer -c1 sset 'Front Mic Boost' 1
alsa_amixer -c1 sset 'Rear Mic' on
alsa_amixer -c1 sset 'Rear Mic' 100%
alsa_amixer -c1 sset 'Rear Mic Boost' 1
alsa_amixer -c1 sset Line on
alsa_amixer -c1 sset Line 100%
alsa_amixer -c1 sset 'Line Boost' 1
alsa_amixer -c1 sset 'Input Source',0 'Rear Mic'
alsa_amixer -c1 sset 'Inverted Internal Mic' on
alsa_amixer -c1 sset 'Inverted Internal Mic' 100%
alsa_amixer -c1 sset 'Inverted Internal Mic Boost' 1
alsa_amixer -c1 cset name='Mic Capture Switch' on
alsa_amixer -c1 cset name='Internal Mic Capture Switch' on
alsa_amixer -c1 cset name='Inverted Internal Mic Capture Switch' on
alsa_amixer -c1 cset name='Mic Capture Switch' on
alsa_amixer -c1 cset name='Internal Mic Capture Switch' on
alsa_amixer -c1 cset name='Inverted Internal Mic Capture Switch' on
alsa_amixer -c1 cset name='Internal Mic Switch' off
alsa_amixer -c1 cset name='Headset Mic Switch' off
alsa_amixer -c1 cset name='ADC Capture Switch' on
alsa_amixer -c1 cset name='Stereo ADC MIXL ADC2 Switch' on
alsa_amixer -c1 cset name='Stereo ADC MIXR ADC2 Switch' on
# heaphones - (c) plbossart
alsa_amixer -c $c cset name='DAC MIXL INF1 Switch' off
alsa_amixer -c $c cset name='DAC MIXR INF1 Switch' off
alsa_amixer -c $c cset name='Stereo DAC MIXL DAC L1 Switch' on
alsa_amixer -c $c cset name='Stereo DAC MIXR DAC R1 Switch' on
alsa_amixer -c $c cset name='Stereo DAC MIXL DAC L2 Switch' on
alsa_amixer -c $c cset name='Stereo DAC MIXR DAC R2 Switch' on
alsa_amixer -c $c cset name='HPO MIX HPVOL Switch' on
alsa_amixer -c $c cset name='Headphone Switch' off
alsa_amixer -c $c cset name='HP Channel Switch' off
alsa_amixer -c $c cset name='Speaker Switch' off
alsa_amixer -c $c cset name='HP L Playback Switch' on
alsa_amixer -c $c cset name='HP R Playback Switch' on
alsa_amixer -c $c cset name='HP Playback Volume' 20
alsa_amixer -c $c1 cset name='DAC MIXL INF1 Switch' on
alsa_amixer -c $c1 cset name='DAC MIXR INF1 Switch' on
alsa_amixer -c $c1 cset name='Stereo DAC MIXL DAC L1 Switch' on
alsa_amixer -c $c1 cset name='Stereo DAC MIXR DAC R1 Switch' on
alsa_amixer -c $c1 cset name='Stereo DAC MIXL DAC L2 Switch' on
alsa_amixer -c $c1 cset name='Stereo DAC MIXR DAC R2 Switch' on
alsa_amixer -c $c1 cset name='HPO MIX HPVOL Switch' off
alsa_amixer -c $c1 cset name='Headphone Switch' off
alsa_amixer -c $c1 cset name='HP Channel Switch' off
alsa_amixer -c $c1 cset name='Speaker Switch' off
alsa_amixer -c $c1 cset name='HP L Playback Switch' on
alsa_amixer -c $c1 cset name='HP R Playback Switch' on
alsa_amixer -c $c1 cset name='HP Playback Volume' 20
fi
done
case "$(cat $DMIPATH/uevent)" in
*S10T*)
alsa_amixer -c 0 set Speaker 95%
;;
*)
;;
esac
post_bootcomplete
}
PATH=/sbin:/system/bin:/system/xbin
DMIPATH=/sys/class/dmi/id
BOARD=$(cat $DMIPATH/board_name)
PRODUCT=$(cat $DMIPATH/product_name)
# import cmdline variables
for c in `cat /proc/cmdline`; do
case $c in
BOOT_IMAGE=*|iso-scan/*|*.*=*)
;;
*=*)
eval $c
if [ -z "$1" ]; then
case $c in
DEBUG=*)
[ -n "$DEBUG" ] && set_property debug.logcat 1
;;
esac
fi
;;
esac
done
[ -n "$DEBUG" ] && set -x || exec &> /dev/null
# import the vendor specific script
hw_sh=/vendor/etc/init.sh
[ -e $hw_sh ] && source $hw_sh
case "$1" in
netconsole)
[ -n "$DEBUG" ] && do_netconsole
phoenixos_compat
;;
bootcomplete)
do_bootcomplete
;;
bootanim)
do_bootanim
;;
init|"")
do_init
;;
esac
return 0
Penutup
Nah itu tadi cara mengatasi masalah mic pada Phoenix OS, bagaimana mudah bukan?. Apabila Anda mengalami masalah untuk fix mic Phoenix OS silahkan komen dibawah. Sekian artikel singkat ini, selamat mencoba dan semoga bermanfaat.